PROJECT 2023
2ND MZART CUSTOM SKID
Fabricate and supply MZART Custom Skid with internal stainless steel storage tool chest for Schlumberger.
PROJECT 2023
supply the Heavy Duty Bin Rack
Fabricate and supply the Heavy Duty Bin Rack for shelving storage unit.
PROJECT 2023
replacement of overhead crane structure
Remove the existing I-beam rail from the runway structure that was in the way before installing the new beam.
PROJECT 2023
IRDV-KB Flying Box
Fabricate and supply IRDV-KB Flying Box made with Aluminium Checker Plates with 3 compartments and 5 drawers.
PROJECT 2023
PERFORM WALL PAINTING
Supply Manpower to Perform Wall Painting at The Pressure Testing Bay
PROJECT 2022
Rotor Stand Project for Manjung T4 Planned Outage
Fabricate the Rotor Stand for Manjung T4 Planned Outage for General Electric Power Services Sdn Bhd and Tenaga Nasional Berhad (TNB) JanaManjung Sdn Bhd.
PROJECT 2022
Weldmends / Crossover Pipe Stand Manjung
Design, execute, coordinate, and finish the Weldmends / Crossover Pipe Stand for General Electric Power Service (M) Sdn Bhd, Manjung with the aid of our skilled engineering team
PROJECT 2022
Water Flow Meter
Supply and install a water flow meter to the washing bay water outlet piping
PROJECT 2022
Offshore Container Door Leaf
Fabricate and install the Offshore Container Door Leaf (A60 Comply)
PROJECT 2022
aluminium tool storage box
Fabricate and supply aluminium tool storage box with an open top.
PROJECT 2022
MZART CUSTOM SKID
Fabricate and supply MZART Custom Skid with internal stainless steel storage tool chest for Schlumberger.
PROJECT 2022
BLOWER SKID
Fabricate and install the blower skid, and repair a blower motor.
PROJECT 2022
40ft GP container
Supply 40ft GP Container with steel base which is including air conditioner
PROJECT 2022
Plexiglass with a frame
Fabricate and supply Plexiglass with a frame and deliver to Labuan, Sabah.
PROJECT 2022
Lifting Bails
Lifting bails can be used to lift drilling tools used for natural gas and petroleum. They are also used by persons in the areas of geographical exploration, and drilling engineering. The bails are also used to protect threads against damage while the items are being moved.
PROJECT 2021
Hydraulic Table Lifter
Fabricate and supply 500kg Hydraulic Table Lifter comes with a pipe roller support stand.
PROJECT 2021
HPSK stinger flying aluminium box
Fabricate and supply HPSK stinger flying aluminium box with 3 compartment dimensions.
PROJECT 2021
Jar Tester Platform
Fabricate, Supply and Install Jar Tester Platform
PROJECT 2021
Fabrication of 0ST & 1ST breakout machine checkered
Fabrication of 0ST and 1ST breakout machine checkered plate 4.5mm including material, 3 layer painting and installation. Additionally, remove the existing SQ grating and replace with checkered plate 4.5.mm, comes with anti slip yellow black painting.
PROJECT 2021
Evergreen burner
Fabricate, supply and install Evergreen burner support stand with 1680mm(H) x 775mm(W) and comes with 8 inches pipe clamp for Schlumberger
PROJECT 2021
burner boom maintenance
Supply manpower for burner boom maintenance, fabricate and install handrail comes with yellow painting for burner platform
PROJECT 2021
Fabricate And Supply Aluminium Box
Fabricate And Supply Aluminium Box Made with 3mm Aluminium Checker Plate comes with 4 Compartment and 4 Drawers within 18 working days.
PROJECT 2021
base plates at VELESTO NAGA 8
Perform hot work and remove all the existing structures of the base plates at NAGA 8 RIG and complete final welding at the rig by using the welded intermediate plate with full welding penetration.
PROJECT 2021
heavy duty grating frame and handrail
Fabricate, supply, refurbish and install heavy duty grating frame and handrail for offshore platform comes with paint, finishing and bolting.
PROJECT 2020
A60 Fire Rated Doors
Fabricate and Install A60 Fire Rated Doors for Offshore Container.
PROJECT 2020
Deck pad eye for horizontol guyline 25T
Fabricate 25T deck pad eye with full penetration welding and perform 37.5 tons of load test with pre and post Magnetic particles Inspection (MPI).
PROJECT 2020
HOF base plate
Design and fabricate HOF Base Plate as requested by Schlumberger and perform Magnetic Particle inspection (MPI) test to full fill the requirements of offshore standards.
PROJECT 2020
JIB crane base plate
Design and fabricate JIB Crane Base Plate as requested by Schlumberger and perform Magnetic Particles inspection (MPI) test to full fill the requirements of offshore standards.
PROJECT 2020
REPAIR THE CORRODE SANITARY PIPE LINING
Mild Steel Cement Lined Pipes were successfully and repair and replaced respectively. It is an underground pipe or tunnel system for transporting sewage from commercial buildings to treatment facilities or disposal.
PROJECT 2020
3 PHASE SINGLE WOUND STEP-DOWN TRANSFORMER
Supply transformer with primary and secondary voltage of 480VAC and 440VAC for Schlumberger offshore services with display panel consisting voltage, current and individual frequency for input and output.
PROJECT 2020
Modifying The Tooling Rack
Assemble and modification of a heavy machinery tooling rack based on the customer’s warehouse space.
PROJECT 2020
INSTALLATION OF SLICK CLAMP TOWER
Drill the concrete and use chemical capsule wall plug to install the tower after do balancing and alignment works.
PROJECT 2020
FABRICATION OF SOLID WOOD BOX
Design and fabricate a solid wood box with timber woods.
PROJECT 2020
DESIGN, FABRICATE AND FIX THE HEAVY-DUTY PEGBOARD
Custom engineering and fabrication pegboard for Schlumberger sub-sea department.
PROJECT 2020
REFURBISHMENT OF LGKA CONTAINERS
Painting work with anti-corrosion undercoating paint.
PROJECT 2020
Fix the main base plate
Drill and fix main base plate into ground concrete with 4 unit x 120mm wall plugs for Schlumberger.
PROJECT 2020
FABRICATION OF TOOLS STORAGE RACK
Design and fabricate U shape racking with 4 layer storage compartments for 10ft crossover containers
PROJECT 2019
120 TON ROTAR LIFTING BEAM INSTALLATION
Install 3 units of 120 ton rotar lifting beam with replacing all the missing parts. The beam was fabricated and installed after the load lifting tested.
PROJECT 2019
REPLACEMENT OF CRUSHER HAMMER FOR TRAPEZIUM MILL
Dismantle trapezium mill body segment to increase the height to 35mm that suits the main body with complete installation of all parts and replacing the crusher hammer that fit into working condition.
PROJECT 2019
TOOLS STORAGE CONTAINER FABRICATION
Design and fabricate a LGKA tools storage container that can fit all the custom, electrical and general tools accordingly.
PROJECT 2019
7HA, 7HB, 9HA AND 9HB TRUST RING
CNC machining of trust ring with fabrication of metal storage box.
PROJECT 2019
Renewal of Bag Filter (480 bags)
Supply labour, tools, transportation and other necessary equipment to renewal Bag Filter for Wesport YTL Slag Cement.
PROJECT 2019
To replace BC02 Tail Drum
Dismantle existing BC02 Tail Drum and install a new one. Alignment and test run.
PROJECT 2019
REPLACEMENT OF CORRODE INCOMING WATER PIPE
Perform pipe line welding by replacing incoming water pipe.
PROJECT 2018
REPLACEMENT OF STEEL PLATFORM
Discharge steel shot for YTL Slag Cement Sdn Bhd.
PROJECT 2018
ISOLATION GATE FOR PD-4000ML-03
Supply, fabricate and installation of isolation gate sized approximately 1000mm (width) x 1300mm (height), steel staircase and platform. Reinstatement of hand railing works and civil concrete works to facilitate the installation of isolation gate.
PROJECT 2018
FABRICATION OF MAIN WAREHOUSE ENTRANCE DOOR
Fabricate and modified warehouse entrance sliding door into 2 panels as it can be opened in 2 directions.
PROJECT 2017
sus 304 dryer fan
Fabricate and supply primary dryer fan material SUS 304.
PROJECT 2017
major stoppage kvmrt mmc gamuda 9.5km tunnel maintenance job
PROJECT 2017
FABRICATE PRIMARY CRUSHER MILL
Dismantle, design, fabricate, machine, fitted, supply and install brand new ball crusher mill.
PROJECT 2017
Installation of Drainage Isolation Gate
Design, fabricate, supply and install isolation gate for industrial water access located near existing construction ponds.
PROJECT 2017
NOZZLE SUPPORT
The nozzle was fabricated using welding, cutting, and coating. The product was developed by referring to the drawing provided.
PROJECT 2017
pan conveyor bucket
Fabricate silica conveyor bucket.
PROJECT 2017
preventive tunnel maintenance shutdown
PROJECT 2017
SPILLAGE CHUTE RENEWAL
Fabricate and renew spillage chute for BC03 at level 41m with 5mm steel plate to Slag Cement Sdn Bhd Wesport.
PROJECT 2017
WASHER BOX INSTALLATION
Installation of washer box for belt conveyor supplied to Vale Malaysia Minerals.
PROJECT 2017
packing plant side guard patching
Packing plant discharge conveyor for Slag Cement Sdn Bhd Wesport.
PROJECT 2017
Main incoming mineral shot
Replacement for an incoming mineral shot.
PROJECT 2016
YTL slag cement sdn bhd shutdown 2016
Replacement shot, conveyors, pipelines, flanges, and valves.
PROJECT 2016
IMERYS MINERALS (M) SDN BHD MAJOR SHUTDOWN
Major shutdown of the production plant to maintain its availability and operational utilization which involved the inspection, replacement or repair of those components that were worn or damaged.